带有引诱角色的多飞行器协同最优制导方法

考虑我方高价值飞行器面临对方拦截器拦截时,发射两枚防御器对拦截器进行拦截的情形。针对对方拦截器采用扩展比例导引律,在4个飞行器均具有一阶线性动力学特性假设下,基于最优控制理论设计了能在拦截末端施加相对拦截角的显式协同制导律。显式协同制导律将高价值飞行器和两枚防御器三者的协同考虑在内,给出了三者最优控制输入的解析解。仿真结果表明,设计的制导律能使两防御器成功拦截敌方拦截器,且在拦截末端施加一个相对拦截角。通过与只考虑两防御器协同的隐式协同制导律进行比较,可发现显式的协同制导律在控制要求和能量消耗上,要优于隐式的协同制导律。此外,还验证了在不同发射条件下的协同制导律的稳定性。     

变循环发动机过渡态性能直接模拟方法

为了实现多变量可调的变循环发动机（VCE）过渡态性能模拟和控制规律设计,在稳态逆算法和过渡态性能隐式格式计算方法的基础上开发了变循环发动机过渡态直接模拟方法。在稳态逆算法模型中加入容积效应和转子动力学方程,实现了同时给定加速率、涡轮前温度和压缩部件工作点的条件下直接模拟计算过渡态过程中变几何参数和燃油流量的调节规律,验证了方法的精度和可行性,并将该方法用于变循环发动机转模态性能模拟和控制规律设计。计算结果表明,过渡态直接模拟方法的误差在0.58%以内,超声速巡航状态下由单外涵模态转换到双外涵模态的时间约为1 s,海平面静止状态下双外涵转单外涵的时间约为3 s,且推力、转速、涡轮前温度、喘振裕度等参数过渡平稳。该方法可简化转模态控制规律设计流程,并提高设计精度。     

基于Kalman滤波的变体飞行器T-S模糊控制

针对变体飞行器的跟踪控制问题,提出了一种基于Kalman滤波的T-S模糊控制方法。考虑飞行器系统状态不可测,引入惯导数据作为辅助信息,利用Kalman滤波算法融合飞控信息与惯导信息实现状态估计。由于变体飞行器在不同变形结构下气动特性变化较大,为便于控制器设计,采用小扰动线性化方法得到飞行器在不同平衡点处的局部线性模型,并通过状态反馈方法设计局部控制器,局部线性模型和局部控制器通过模糊集和模糊规则聚合成一个连续光滑的全局T-S模糊模型和T-S模糊控制器。通过综合Kalman滤波器与T-S模糊控制器得到一个基于Kalman滤波的T-S模糊控制器。仿真结果表明,该控制器在变形过程中能够实现状态估计,保证飞机的跟踪性能。     

横向矩形微槽对高超边界层失稳的控制作用

模拟了马赫数为6的空间发展平板边界层,通过在平板表面添加二维横向微槽研究了其对基本流及第二模态扰动波的影响。结果表明:所研究的二维微槽构形与常规多孔涂层相比具有较大的尺寸(100 μm以上),微槽对基本流的流向速度影响很小,空间采样点上的频谱并未出现新的不稳定模态。微槽有利于减小摩擦阻力,槽内流动导致的压差阻力比摩擦阻力低1~2个数量级,总阻力随着开槽率的增加而减小,当开槽率为06时,减阻效果超过40%。在入口以两种方式添加了第二模态扰动波,包括单个扰动和多个叠加扰动,下游的演化结果说明横向微槽能够在一个宽带频率范围内对第二模态的增长起到明显的抑制作用,且控制效果随着开槽率的增大而增强。     

面向一体化计算的整体式液体冲压发动机建模及性能评估

为发展冲压发动机性能工程预估方法,建立了面向一体化计算的整体式液体冲压发动机性能计算模型,并使其兼容基团贡献算法,提高了拓展性。利用模型分析了冲压发动机在攻角0°～6°、高度0～18km、马赫数2.0～3.5、余气系数1.0～2.9范围工况多维度连续变化下,比冲、推力系数和燃油质量流量的速度-高度特性、高度-节流特性、节流-速度特性以及攻角特性。研究结果表明:性能计算模型可在一体化计算条件下、基团贡献算法允许范围内,不依赖试验数据对冲压发动机性能预估,计算结果与技术参考值相比相对误差均小于14%。推力系数和比冲具有基本一致的速度-高度特性和相似的高度-节流特性,受燃气组分影响,推力系数和比冲的节流-速度特性差异明显。燃油质量流量的变化规律不同于比冲和推力系数,在进入平流层后呈现折缓趋势,而呈现连续性,速度越大、高度越低、余气系数越小,燃油质量流量越高,反之则越小。引入攻角以后,攻角越大,比冲和推力系数越低,进气道起动马赫数越高;攻角-起动马赫数曲线小范围内近似线性,攻角超过5.6°非线性加剧。     

Numerical analysis and optimization of boundary layer suction on airfoils

Numerical approach of hybrid laminar flow control(HLFC) is investigated for the suction hole with a width between 0.5 mm and 7 mm. The accuracy of Menter and Langtry’s transition model applied for simulating the flow with boundary layer suction is validated. The experiment data are compared with the computational results. The solutions show that this transition model can predict the transition position with suction control accurately. A well designed laminar airfoil is selected in the present research. For suction control with a single hole, the physical mechanism of suction control, including the impact of suction coefficient and the width and position of the suction hole on control results, is analyzed. The single hole simulation results indicate that it is favorable for transition delay and drag reduction to increase the suction coefficient and set the hole position closer to the trailing edge properly. The modified radial basis function(RBF) neural network and the modified differential evolution algorithm are used to optimize the design for suction control with three holes. The design variables are suction coefficient, hole width, hole position and hole spacing. The optimization target is to obtain the minimum drag coefficient. After optimization,the transition delay can be up to 17% and the aerodynamic drag coefficient can decrease by 12.1%.     

Flow separation control on swept wing with nanosecond pulse driven DBD plasma actuators

A 15° swept wing with dielectric barrier discharge plasma actuator is designed.Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actuation frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.     

Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

An equivalent ground thermal test method for single-phase fluid loop space radiator

Thermal vacuum test is widely used for the ground validation of spacecraft thermal control system. However, the conduction and convection can be simulated in normal ground pressure environment completely. By the employment of pumped fluid loops’ thermal control technology on spacecraft, conduction and convection become the main heat transfer behavior between radiator and inside cabin. As long as the heat transfer behavior between radiator and outer space can be equivalently simulated in normal pressure, the thermal vacuum test can be substituted by the normal ground pressure thermal test. In this paper, an equivalent normal pressure thermal test method for the spacecraft single-phase fluid loop radiator is proposed. The heat radiation between radiator and outer space has been equivalently simulated by combination of a group of refrigerators and thermal electrical cooler(TEC) array. By adjusting the heat rejection of each device, the relationship between heat flux and surface temperature of the radiator can be maintained. To verify this method,a validating system has been built up and the experiments have been carried out. The results indicate that the proposed equivalent ground thermal test method can simulate the heat rejection performance of radiator correctly and the temperature error between in-orbit theory value and experiment result of the radiator is less than 0.5 C, except for the equipment startup period. This provides a potential method for the thermal test of space systems especially for extra-large spacecraft which employs single-phase fluid loop radiator as thermal control approach.     

基于环控物理仿真平台的余度模型设计

在环控物理仿真平台上,基于MATLAB和Vxworks环境,建立了飞机环控系统余度模型。详细论述了环控系统故障模型、机电管理计算机模型。此外,对模型的有效性、可靠性进行了验证。通过试验验证,表明模型结构正确、能够满足环控系统余度功能要求。